Table of Contents
Advertisement
Installation
Place the appliances next to each
other so that the fronts are aligned,
leaving a gap of slightly over 40 mm
between them.
Remove the screws and keep
them for the next step. They will be
needed for securing the connecting
bracket .
86
By fitting the upper connecting
bracket both appliances are aligned
in height and depth. If one appliance
stands higher than the other, start with
the higher one first.
Fit the upper connecting bracket
to the pins on the appliance and
secure it as follows:
1. Secure the connecting bracket in
position using the screw that you
have just unscrewed from the
appliance and the screws .
2. Now press the second appliance up
against the spacer piece on the
connecting bracket.
3. Secure the connecting bracket in
position on the second appliance
using the screw that you have just
unscrewed from the appliance and
the screws . When doing so push
the appliances together slightly.
Advertisement
Table of Contents
