Message
lights up red in the
display and an alarm
sounds.
Possible cause and remedy
The temperature alarm has been triggered (see
"Temperature and door alarm - Temperature alarm").
The temperature in the freezer has risen higher or
fallen lower than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too
frequently.
– A large quantity of fresh food has been placed in
the freezer without switching on the SuperFreeze
function.
– A prolonged power cut (mains outage) has
occurred.
– The appliance has a fault.
Touch
in the display.
The alarm message is confirmed:
the alarm stops.
The start screen appears in the display: The warmest
temperature recorded in the freezer will flash in the
display for about 1 minute. Then the temperature
display will change to the current temperature in the
freezer.
You can exit the flashing temperature display early:
Touch the temperature display.
The warmest temperature displayed will disappear.
The display will revert to showing the current
temperature in the freezer.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.
Problem solving guide
goes out and
59