Table of Contents
Advertisement
Installation
Secure the door opening aid using
the screw with the plastic collar
and the screw without plastic
collar . Do not overtighten the
screws!
Useful tip: Check whether the door
opening aid moves easily by actuating
it. If it does not move freely, the screws
should be loosened slightly.
Fit covers and .
98
Changing over the soft-close
mechanism
If you want to limit the door opening
angle to approx. 90° you need to fit
the door opening angle limiter
supplied before refitting the soft-close
mechanism (see "Installation - Fitting
the door opening angle limiter").
Undo and remove the screw on
the soft-close mechanism and
insert a screwdriver behind the soft-
close mechanism.
Remove the soft-close mechanism
and turn it 180°.
Advertisement
Table of Contents
