Additional installation steps for the
front of the appliances
Adjust the front feet with the
spanner .
1. Screw in the central adjustable feet
so that they do not touch the floor.
2. Now level the complete side-by-side
combination with the outermost
adjustable feet .
Place the trim at the front of the
appliance underneath the top
connecting bracket and carefully
work the trim into the groove. Use
a soft cloth to do this to avoid
denting the trim.
Useful tip: Press both ridges along the
entire length of the trim together. This
makes it easier to fit the trim into the
gap.
Remove the protective foil from the
stainless steel trim.
Installation
89