Message
lights up red in the
display, a fault code F
with numbers appears
and an alarm sounds.
lights up yellow in
the display and an
alarm sounds.
Possible cause and remedy
There is a fault.
An appliance fault always has priority over any
settings which have just been selected. An appliance
fault has priority over any current door and/or
temperature alarms in the display.
To switch the alarm off touch in the display.
Call Miele.
To report the fault you need the fault code and also
the model number and serial number of your
appliance. You can access these in the display.
To do this touch in the display.
The appliance data required will be shown in the
display.
Confirm with
OK
In an emergency the appliance can be switched off
directly from the fault display.
Touch .
The water supply is not open.
Open the water supply.
The ice cube drawer is not in the appliance. An alarm
sounds after closing the door.
Touch in the display.
The alarm message is confirmed and the warning
tone stops.
The current temperature will be shown in the display
again.
Replace the drawer correctly or switch the ice
cube maker off.
Problem solving guide
.
61