Setting The Duration Before The Door Alarm  Sounds; Switching The Sensor Tone  On / Off; Setting The Volume / Switching Off Alarms And Audible Tones - Miele KFN 28032 D ws Operating And Installation Instructions

Selecting further settings
Setting the duration before the door
alarm  sounds

The appliance has a door alarm. If a
door is open for a longer period of time
an alarm will sound (if this has not been
switched off; see "Setting the volume /
Switching off alarms and audible
tones") and 
will light up in the dis-

play (see "Temperature and door alarm
- Door alarm").
You can set the duration before the
door alarm  sounds with the seg-

ment bar:
The duration can be set in 30 second
increments, starting with 30 seconds
(Level 1 = 1 filled-in segment) to a max-
imum of 3 minutes 30 seconds (Level 7
= 7 filled-in segments).
40
Switching the sensor tone 
off 

Every time a selectable field is touched
a sensor tone sounds. You can switch
this on  or off 

Setting the volume / Switching off
alarms and audible tones 
You can set the volume of the alarm
and audible tones in the segment bar:
If all segments are filled in, the max-
imum volume is set.
If no segments are filled in, the alarm
and audible tones are switched off.
 will appear.
You will hear the volume change as it is
adjusted.
Alarms and audible tones for temper-
ature alarms, fault messages, interrup-
tions to the power supply or a set
minute minder cannot be switched off.
on /

.
