Table of Contents
Advertisement
Problem solving guide
Message
lights up red in the
display and an alarm
sounds.
60
Possible cause and remedy
There is a power cut: The temperature in the
appliance over the last few days or hours has risen
too high because of a power cut or an interruption to
the power supply.
Touch
in the display.
The fault message is confirmed:
goes out and the alarm will stop.
The start screen appears in the display: The warmest
temperature recorded in the freezer will flash in the
display for about 1 minute. Then the temperature
display will change to the current temperature in the
freezer.
You can exit the flashing temperature display early:
Touch the temperature display.
The warmest temperature display will disappear. The
display will revert to showing the current temperature
in the freezer. The appliance will go back to the last
temperature setting when the power is restored.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.
Rectify the cause of the alarm.
Advertisement
Table of Contents
