Table of Contents
Advertisement
Insert the soft-close mechanism
on the door hinge side (at an angle
initially) until it clicks into position.
Then press the other end of the soft-
close mechanism into the opening.
Secure the soft-close mechanism
with the screw .
Changing over the bearing bush
stopper
Pull the stopper out of the door
bearing bush and replace it on the
opposite side.
Refitting the door
Place the door onto the hinge pin
from above and guide the upper
opening on the hinge side of the door
onto the door hinge with the bearing
bush.
Installation
99
Advertisement
Table of Contents
