Table of Contents
Advertisement
Problem solving guide
Message
lights up in the
display and an alarm
sounds.
lights up red in the
display and an alarm
sounds.
62
Possible cause and remedy
You have selected the "Setting the cleaning
position " function, and the appliance has detected
that the ice cube drawer is full. The selected
procedure is interrupted and an alarm sounds.
Touch in the display.
The alarm message is confirmed and the warning
tone stops.
The current temperature is shown in the display again.
Empty the drawer, and then replace it in the
appliance.
There is a fault with the ice cube maker.
Touch
in the display to switch the alarm off.
Call Miele.
To report the fault you need the fault code and also
the model number and serial number of your
appliance. You can access these in the display.
To do this touch in the display.
The appliance data required will be shown in the
display.
Confirm with
OK
The ice cube maker can also be switched off in
Settings mode.
.
Advertisement
Table of Contents
