Table of Contents
Advertisement
Setting the time before the door
alarm
is triggered
The refrigeration appliance has a door
alarm. If a door is open for a longer
period of time an alarm will sound (if
this has not been switched off: see
"Setting the volume/Switching alarms
and audible tones on/off") and
light up in the display (see "Temperature
and door alarm – Door alarm").
You can set the time before the door
alarm
sounds with the segment bar:
The time can be set in 30-second incre-
ments, starting with 30 seconds (level
1 = 1 filled-in segment) up to a max-
imum of 3 minutes 30 seconds
(level 7 = 7 filled-in segments).
Selecting further settings
Switching the sensor tone
off
Every time a selectable field is touched
a sensor tone sounds. You can switch
this on
Setting the volume/Switching alarms
and audible tones on/off
will
You can set the volume of the alarms
and audible tones in the segment bar:
If all segments are filled in, the max-
imum volume is set.
If no segments are filled in, the alarm
and audible tones are switched off.
appears.
You will hear the volume change as it is
adjusted.
Alarms and audible tones for temper-
ature alarms, error messages, inter-
ruptions to the power supply or a set
minute minder cannot be switched off.
or off
.
on /
39
Advertisement
Table of Contents
