Installation
Use your fingers to insert the pin
into the door bearing bush.
Screw in the pin (by approx.
¼ turn) until it clicks into position.
Fit the safety cover onto the pin.
The appliance door is not secure until
the safety cover has been correctly
fitted.
100
Securing the soft-close mechanism
Open the door 90°.
Slide on the cover until it clicks
into position.
Push the hinged arm into the
opening on the door hinge.
Insert the pin into the door hinge
from above. Turn this with a
screwdriver (by approx. ¼ turn) until
both lugs on the pin click into
position correctly in the grooves.
Pull out the red safety device .
Useful tip: Keep the red safety device
in case you want to change the door
hinging again at a later date.