Installing A Pc/104 Module - Advantech PPC-57 Series Manual

2.7 Installing a PC/104 Module

The PPC-57's PC/104 connector give you the flexibility to attach
PC/104 expansion modules. These modules perform the same
functions as traditional plug-in expansion cards. Using these
modules save space and valuable slots.
To install a PC/104 module:
1. Verify that all power sources to the PPC-57 have been discon-
nected.
2. Detach the steel cover behind the rear panel.
3. Plug the PC/104 module's male connectors into the ISA
expansion slot's female connectors by pressing the module
firmly but carefully.
4. Secure the two PC/104 modules onto the PPC-57.
5. Affix the PC/104 cover.
Chapter 2 System Setup
21