Advantech PPC-57 Series Manual page 86

Step 2: Go to the AutoCAD directory where the new drivers were
installed and run the driver installation program by typing
ACAD12 -r <ENTER>. This program will configure your AutoCAD
R12 to use the new display drivers. Select TurboDLD Classic.
Select Configure Video Display. In Display Device Configuration,
choose Select Graphics Board/Resolution. Then choose Select
Display Graphics Board. After choosing a graphics board, go to
Select Display Resolution. After selecting the display resolution,
save the new configuration, and return to the main menu.
This menu allows you to modify:
Number of AutoCAD Command Lines
Font Size
Dual Screen
User Interface Configuration
Double Click Interval Time
BP Button
BP Highlight
BP Refresh
BP Cache
This menu allows you to modify:
Display List
Drawing Cache
Use Acad 31-bit Space?
Internal Command Echo
BP Zoom Mode
Regen Mode
PPC-57 User's Manual
7 6
6x8/8x8/8x14/8x16/12x20/12x24
Enable/Disable
Patt Line/Xor Rect/Both
Enable/Disable
Enable/Disable
Enable/Disable
Enable/Disable
Yes/No
Enable/Disable
Freeze/Float
Incremental/Fast