Running The Setup Program; Operation Key - Advantech PPC-57 Series Manual

B.3 Running the Setup Program
1. Go to the root directory of ATS.
2. Key in S [Enter] (or ATSDOSCP).
Operation keys
1. Use the [↑] and [↓] keys to move the cursor up or down to the
desired function.
2. Use the [←] and [→] keys to select the desired variable setting.
3. Press [Enter] to confirm the setting.
Settings for running the touchscreen setup program are:
1. Device type: PS/2 port (factory default)
This setting allows the touchscreen's operating software to
locate the proper device type. The proper device for the
PPC-57 is the PS/2 port.
2. Button Mode
This is the way in which the touchscreen simulates the action
of a left mouse button. Four options are presented:
a) Stream mode: The touchsreen does not simulate the button
mode, but only outputs its coordinates. This mode is normally
not selected.
b) Lift-off mode: Activates the moment a finger or stylus lifts
off the touchscreen.
c) Touch down mode: Activates the moment a finger or stylus
presses against the touchscreen.
d) Drag drop mode: Activates whenever a finger or stylus
presses against the touchscreen. This is the factory default
setting.
3. Calibration settings
These are the corresponding location file numbers for different
VGA mode resolutions.
PPC-57 User's Manual
90