Burn Media Installation - Rinnai Linear Series Installation Manual

Burn media installation

Experience has shown that the majority of performance problems are caused by burn media being
installed incorrectly. Please take the time to read and follow the instructions as malfunctioning due
to incorrect burn media placement is not covered by warranty.
The Linear MUST NEVER be used with other burn media or burn media that is damaged.
•
The Linear burn media sets are different and cannot be interchanged, please ensure you have
•
ordered the correct set before installation
Model
Linear 800 traditional log set
Linear 800 FlameTech log set
Linear 1000 traditional log set
Linear 1000 crushed glass
Linear 1500 traditional log set
Linear 1500 crushed glass
Separate burn media installation instructions
For the safe operation of the fire, placement of the burn media is a critical step in the installation
process. Due to the number of steps involved, separate instructions (too many pages to
incorporate into this guide) have been developed. There is also a colour burn media placement
sheet attached to the glass frame. Make sure you have these before starting.
We will be updating this guide a month or two after the Linear launch to include links to installation videos via Rinnai's
1
YouTube channel.
Correct placement
It is important to place the burn media in the correct position. Incorrect placement can create
carbon build-up and affect performance. Malfunctioning due to improper placement is not covered
by warranty.
Burn media Additional video resource
kit number
R2901
[placeholder
R2900
[placeholder
R2902
[placeholder
R2904
[placeholder
R2903
[placeholder
R2905
[placeholder
1 URL]
1 URL]
1
URL]
1
URL]
1 URL]
1
URL]
Linear installation guide 13563-B 02-19 | 25