Danfoss VLT FC 100 Series Manual page 56

6. Parameters
8-52 DC Brake Select
Option:
[0]
[1]
[2]
6
[3]
8-53 Start Select
Option:
[0]
[1]
[2]
[3]
8-54 Reversing Select
Option:
[0]
[1]
[2]
[3]
56
Digital input
Bus
Logic AND
* Logic OR
NB!
This parameter is active only when par. 8-01
control word
.
Digital input
Bus
Logic AND
*
Logic OR
NB!
This parameter is active only when par. 8-01
control word
.
Digital input
Bus
Logic AND
* Logic OR
MG.33.D3.02 - VLT
NB!
This parameter is active only when par. 8-01
trol Site
is set to [0]
Function:
Select control of the DC brake via the terminals (digital input)
and/or via the fieldbus.
Control Site
Function:
Select control of the frequency converter start function via the
terminals (digital input) and/or via the fieldbus.
Activates Start command via the serial communication port or
fieldbus option.
Activates Start command via the fieldbus/serial communication
port, AND additionally via one of the digital inputs.
Activates Start command via the fieldbus/serial communication
port OR via one of the digital inputs.
Control Site
Function:
Select control of the frequency converter reverse function via
the terminals (digital input) and/or via the fieldbus.
Select Bus [1], to activate the Reverse command via the serial
communication port or fieldbus option.
® is a registered Danfoss trademark
FC 100/ 200/ 300 DeviceNet
Con-
Digital and control word
.
is set to [0] Digital and
Digital and
is set to [0]