Danfoss VLT FC 100 Series Manual page 43

FC 100/ 200/ 300 DeviceNet
5.3.9. Instance 2 Attributes: Polled I/O
Attrib-
ute
1
2
3
4
5
6
7
8
9
12
13
14
15
16
17
Access Name Data
type
Get State USINT
Get Instance USINT
Type
Get Transport USINT
Class Trig-
ger
Get Produced UINT
Connec-
tion ID
Get Consumed UINT
Connec-
tion ID
Get Initial USINT
Communi-
cation
Character-
istics
Get Produced UINT
Connectin
size
Get Consumed UINT
Connec-
tion size
Get/Set Expected UINT
Package
Rate
Get Watchdog USINT
timeout
action
Get Produced UINT
Connec-
tion Path
Length
Get Produced Array of
Connecti- USINT
no Path
Get Consumd UINT
Connec-
tion Path
Length
Get Consumed Array of
Connec- USINT
tion Path
Get Production UINT
Inhibit
Time
MG.33.D3.02 - VLT ® is a registered Danfoss trademark
5. How to Access the Parameters
Description
State of the object
Indicates either I/O or Explicit Message
Defines behaviour of the connection
CAN Identifier Field when the connection trans-
mits
CAN Identifier Field value that denotes message
to be received
Defines the message group(s) across which pro-
ductions and consumptions associated with this
connection occur
Maximum number of bytes transmitted across
this connection
Maximum number of bytes received across this
connection
Defines value used in Transmission Trigger Tim-
er and Inactivity/Watchdog timer
Defines how to handle Inactivity/Watchdog
timeout
Number of Bytes in the produced connection
path attribute
Specifies the Application object(s) whose data is
to be produced by these Connection Objects
Number of bytes in the consumed connection
path attribute
Specifies the Application object(s) that are to re-
ceive the data consumed by this Connection ob-
ject
Defines minimum time between new data pro-
ductin. This attribute is required for I/O Client
connection.
5
43