Cleaning & Maintenance - NuWave 31201 Manual & Recipes

Cleaning & Maintenance
• Do not store food in NuWave PPC when not in use.
• Clean and dry cookware after each use. (Warm soapy water is recommended for cleaning).
• After each use, release and clean anti-clogging nut and pressure regulator completely.
The steam discharging tube and the anti-clogging nut should not be filled or blocked by
any substances, such as food residue.
• When installing pressure regulator, make sure that it is placed in the correct position.
• After each use, safety valve should be examined to ensure it is clean. (Clean with hot
water if required).
• After each use, rubber gasket should be cleaned thoroughly with warm water. It should
be installed back in lid after washing.
• The rubber gasket will last longer if you place lid upside down on top of the NuWave PPC
after it has been washed.
• Do not use steel wool, abrasive scouring powders or harsh liquids when cleaning
the NuWave PPC.
• Depending on how often the NuWave PPC is used, replace rubber gasket for lid seal and
sealing ring for Pressure Regulator Device every 1-2 years. In case of damage (tears
or cracks, deformation on the edges or hardening), these parts should be replaced
immediately. Failure to do so may affect proper functioning and safety. Replacement
parts for your NuWave PPC go to: www.NuWaveNow.com or contact customer service
at 877-689-2838.
16
Cleaning & Maintenance