Care & Maintenance - NuWave Nutri-Po 13Q Owner's Manual

• Unplug the NuWave Nutri-Pot
before cleaning.
• Wipe the base and inside of the Base, if necessary, with a clean cloth.
Do not immerse the Base in water or spray any water in it.
• Remove and clean the Water Collector. Wipe with a wet cloth and return to
the pressure cooker.
• The Lid can be detached from the Base. All parts inside the Lid can be
hand washed separately with water and should always be checked to
make sure they are not damaged or cracked.
• Use a sponge or non-metallic soft brush to clean the Inner Pot, then wipe
the surface with a clean cloth.
SILICONE GASKET INSTALLATION
MAKE SURE THE SILICONE GASKET HAS NO CRACKS OR IS IN ANYWAY
DAMAGED.
Removing the Silicone Gasket
• Open the Lid.
• With one hand holding the inner Lid down, gently pull the Silicone Gasket up.
Installing the Silicone Gasket
• Line up the Silicone Gasket on top of the metal ring.
• Gently push the Silicone Gasket down, making sure the metal ring is inside the
Silicone Gasket's groove.
CARE & MAINTENANCE
CARE & MAINTENANCE
Digital Pressure Cooker and let it cool
®
Owner's Manual
11