Avaya Communication Server 1000 Installation And Commissioning Manual page 241

Wlan ip telephony
Hide thumbs Also See for Communication Server 1000:
Table of Contents

Advertisement

• Jitter is the current delta from the desired jitter buffer depth, in microseconds.
• LastRate is the last successful transmit data rate.
• GatewayType is a mnemonic that indicates the gateway type. The mnemonic is one of:
SAWA2
2Mb
11Mb
Diagnostics Screen 3 displays a list of the APs that are heard, in the following format:
C : mmmm ch - ss
1 : mmmm ch - ss
2 : mmmm ch - ss
3 : mmmm ch - ss
• C is the AP currently in use.
• 1, 2, and 3 are the candidate APs.
• mmmm is the hexadecimal number comprised of the last two octets of the AP MAC
address.
• ch is the channel number that the AP is configured on.
• ss is the signal strength for the AP in dBm.
• aid is the Association ID of the currently associated AP.
• mnem is a mnemonic that indicates why the handset did not hand off to this candidate:
Unkn
Weak
Rate
Full
AthT
AthF
AscT
AscF
Avaya WLAN IP Telephony Installation and Commissioning
all phones are rate limited to 2 Mb because an old 2
Mb handset is on the network (not applicable for the
Avaya 6120 WLAN Handset and the Avaya 6140
WLAN Handset )
old style 2 Mb (not applicable for the Avaya 6120
WLAN Handset and the Avaya 6140 WLAN Handset )
New style 11 Mb (for all handsets)
aid
mnem
mnem
mnem
reason unknown
signal strength too weak
One or more basic rates not supported
AP cannot handle bandwidth requirements
Authentication Timeout
Authentication Failure
Association Timeout
Association Failure
Diagnostic Tools
November 2010
241

Advertisement

Table of Contents
loading

Table of Contents