3. Reset the system.
4. Type the following command using the terminal or PC keyboard:
5. Enter the default logon name and the default password:admin admin
Next, configure the WLAN Application Gateway (including IP address) by following the steps
in the
Task summary list
Configuration
The NetLink OAI System screen is the main menu of the Administration Console. Use this
screen to configure the WLAN Application Gateway 2246.
Administration console navigation
Use the keys described in
around the Administration console screens.
Avaya WLAN IP Telephony Installation and Commissioning
Important:
If you use Windows 2000, you must install Service Pack 2 to enable the use of
™
HyperTerminal
.
The following appears on the terminal display:
04830130
0255CC [CTRL M] [CTRL J]
The command does not display on the screen as it is typed.
The Login prompt appears. If an error is made when entering the command string,
the message
Ill Formed Packet
appears. It appears as a series of numbers followed by some form of the typed
command. If this occurs, repeat
admin admin
The logon name and password are case-sensitive.
The NetLink OAI System screen appears. This screen, the main menu screen of
the Administration Console, displays the factory-default name of the WLAN
Application Gateway 2246 to which the serial port is connected
on page 194.
Table 46: Administration console navigation
3
on page 193 and
4
Configuration
on page 193.
on page 194 to move
November 2010
193