Avaya Communication Server 1000 Installation And Commissioning Manual page 168

Troubleshooting
Message
Bad Code Type xx
Expected Code Type yy
Bad Config
Bad ESSID (For WLAN
Handsets 2210/2211/2212
only.)
Bad SSID (For Avaya
6120/6140 WLAN
Handsets only.)
Bad Local ID
Bad Local ID Type
Bad Network IP
Bad Network Mask
Bad Payload Type
168 Avaya WLAN IP Telephony Installation and Commissioning
Description
authentication response from
the AP; displays the MAC of
the failing AP.
xx, yy = software license types
Handset software does not
match the current handset
license selection.
Some needed configuration
parameter has not been set.
The wireless handset is
configured for static ESSID (as
opposed to Learn once or
Learn always) and no ESSID is
entered.
The wireless handset is
configured for static SSID (as
opposed to Learn once or
Learn always) and no SSID is
entered.
The value of the Phase 1 Local
ID type entered in the handset
through the menus or the
Configuration Cradle is
improperly configured.
The Phase 1 Local ID type
entered in the handset through
the menus or the Configuration
Cradle is missing or invalid.
The value of the Remote
Network IP address entered in
the handset through the menus
or the Configuration Cradle is
missing or invalid.
The value of the network mask
for the Remote Network
entered in the handset through
the menus or the Configuration
Cradle is missing or invalid.
The VPN server is not
accepting some of the
parameters passed to it by the
handset. One common
Action
that the AP is configured per
the Configuration Note. Try
another AP.
Download new software
from the Avaya site. See
Software updates on
page 155.
Check all required wireless
handset configuration
parameters for valid
settings.
Enter an ESSID in the
configuration settings or
change to one of the Learn
modes.
Enter an SSID in the
configuration settings or
change to one of the Learn
modes.
Enter a valid ID value.
Enter a valid ID type. KEY ID
is the only valid choice.
Enter a valid remote network
IP address.
Enter a valid network mask.
If the VPN Client IP is
statically configured, ensure
that the address assigned to
the handset is unique. If
November 2010