Annual Service Requirement - Infinity 780HD Instruction For Users

780 HD INSTALLATION INSTRUCTIONS
Point out the position of the power source for the appliance, plus demonstrate using the
additional battery holder and adaptor lead, the battery backup option. ("C" cell batteries not
included within this appliance).
Demonstrate the lighting and extinguishing procedures to the user and the removal and refit of
the glass panel for cleaning and the fitting of the battery back up kit.
Hand these instruction over to the user along with the battery holder, adaptor lead plus M4 nut
runner for the removal of the glass panel.
Please be aware that the non-reflective glass may in some lights and from some angles have a
blue tinge to it this is perfectly normal. Also be aware that if the glass liners are fitted in the fire
with the non-reflective glass you will still have a reflection in the glass liners.

Annual Service Requirement.

General
Servicing should be carried out annually by competent person whose name appears on the gas safe
register. All Gas Safe engineers should possess an ID carrying the logo below.
Before commencing any service or replacement of part, turn off the gas supply to the fire. After servicing
check for gas soundness.
When ordering spare parts please quote the appliance name and serial number.
Check for debris
At least once a year check for debris in the catchment area behind the fire and
in the flue way. To undertake this check the following procedure should be
followed.
Remove the four M4 nuts fixing the glass clamp to the glass panel. (See Fig 8). With the nuts
removed, pull the glass clamp clear of the four studs. Finally lift the glass panel out of the bottom
glass fixing.
Remove the log shapes.
Lift out the air tray assembly from within the fire box shelf.
Remove the four screws retaining the gas inlet plate and the ECU cover.
LT7185 Issue No 1 (04/17)
P a g e | 46