Fuel Bed Layout; Birch Fuel Bed - Infinity 780HD Instruction For Users

Cleaning the fuel bed shapes. (Please refer to customer protection information on page 2 of this
booklet before cleaning or replacing any refractory materials).
The fuel bed components are delicate and they should be handled with great care. They can
be brushed very gently with a soft brush to remove dust or any deposits. A vacuum cleaner may
only be used after the loose components and moulded shapes have been removed from the
780 HD fire box.
It is important that all fuel bed shapes are positioned as shown in these instructions.

Fuel Bed Layout

Fuel bed lay out video can been found at:
http://www.charltonandjenrick.co.uk/780guide/

Birch Fuel bed

Firstly, place the air tray within the fire box shelf as shown.
The Log & bark shapes must be positioned in accordance to the following instructions to give
the correct flame picture & reduce the risk of glass staining.
Slide the log piece behind the burner
slots
Make sure not to cover the burner slots on the front burner
P a g e | 10
780 HD USERS INSTRUCTIONS
LT7185 Issue No 1 (04/17)