Table of Contents
Advertisement
Installing Hardware and Configuring Connectivity
2. Press <SHIFT><NUMLOCK><NUMLOCK>, type the number of the server, and press
<RETURN> on the KVM keyboard.
Also refer to
Server Control Connections
and Indicators
on page 47.
A green light near the server Unit Select button indicates that the server and KVM are connected.
Server Control Connections
The following illustration shows the interconnections between servers for console sharing. The
bottom system is the first on the chain and is designated as Server 1 for selection purposes.
KVM Connections with AC Power
The Speech Server and Windows servers are connected to each other with a C2T daisy chain cable
as shown in the preceding diagram. The number 1 server in the chain is connected to the KVM with
a C2T output cable as opposed to another server.
Caution:
If Windows nodes do not come up after a remote reboot, check the connections between the
KVM and the Windows nodes. Reconnect the KVM cabling to the Windows nodes and reboot
the nodes to resolve this issue.
Refer to the MPS Speech Server Reference Guide for connection instructions.
Avaya Media Processing Server 500 Hardware Installation and Maintenance
46
on page 46 and
Speech or Application Server Controls
Comments? infodev@avaya.com
October 2014
Advertisement
Table of Contents
