Main Menu Options; Auto; Built-In Programs; Program 01 - SHOWTEC LED Pinspot Q4 Manual

LED Pinspot Q4

Main Menu Options

1. Auto

2. Built-in Programs

3. Static Colors
4. Sound-controlled mode
5. DMX-512 mode
6. Master/Slave mode
7. Settings
8. Info
The LED Pinspot will show its software version at start-up !
1. Auto
With this menu you can set Auto mode.
01) Press the MODE button until the display shows
02) The device will now run all the available built-in programs in a sequence. It is not possible to adjust
any settings in Auto mode.
2. Built-in Programs
With this menu you can set the built-in programs.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to navigate through the 10 built-in programs.

2.1. Program 01

01) When the display shows
02) Press the UP/DOWN buttons to choose one of the 16 preset colors:
Ordercode: 42407
, press the SETUP button to enter the menu.
Red
Green
Blue
White
Amber
Red+Green
Red+Yellow
Red+Blue
Blue+Yellow
13
.
.