Table of Contents
Advertisement
LED Pinspot Q4
7.1. Dimming Curves
With this menu you can set the dimming curves.
01) Press the UP/DOWN buttons to choose the desired dimming curve. The adjustment range is between
Cu-1
Cu-3
7.2. Reset
With this option you can restore the factory default settings.
01) Press the UP/DOWN buttons to choose between
02) Press the SETUP button to confirm.
03) If you have chosen
7.3. DMX Fail
With this option you can adjust the behaviour of the device in case of a DMX signal error.
01) Press the UP/DOWN buttons to choose between
02) If you have chosen
03) If you have chosen
before the DMX signal error, which ensures undisrupted performance.
7.4. DMX Synchronization
With this option you can set the DMX synchronization of the device. This tool helps to keep multiple
fixtures synchronized, when using them in Master/Slave mode.
01) Press the UP/DOWN buttons to choose between
Ordercode: 42407
.
, the factory default settings will be restored.
, the device will black its output out, when a DMX signal error occurs.
, the device will fall back on the last properly working DMX signal from
Cu-2
Cu-4
and
.
and
.
and
.
16
Advertisement
Table of Contents
