Table of Contents
Advertisement
Symbol
Designation
Water flow
Ambient air temperature Adequate
Operation indicator
Defrost indicator
On/off button
button to set and confirm parameters
value setting buttons
3.1.1 Reading and changing parameters
3.1.2 Locking and releasing the key pad
Press
and
for 3 seconds:
3.2 Starting up the appliance
• Check that no tools or other objects have been left inside the device.
• The access door for technical components must be fitted.
• Set the by-pass and setting valves (see § 2.3) as follows:
- valve 1 completely open,
- valves 2-3-4 & 5 closed.
An incorrect setting of the by-pass valve may lead to device malfunction.
H0361900.E - EN - 2015-02
steady
Water flow-rate ok
During heating or air conditioning On standby until operating command received
Defrost in progress
or
flashing
Water flow too weak, high or absent
Inadequate
/
EN
6
Hide quick links:
Advertisement
Table of Contents
