Product Information; Declaration Of Conformity; Open Source Software; Product Data For Energy Consumption - Bosch Control 8313 Service Instructions For Contractors

2

Product Information

This installation and maintenance instructions contain important
information for the safe and correct installation, initial commissioning,
and maintenance of this control unit.
Depending on the software version, the display and menu items shown
in the instructions may differ from those in the control unit.
The operating instructions contain information on operation of the
control unit.
▶ Observe operating instructions of the control unit and the heat
source.
2.1

Declaration of Conformity

The design and operation of this product conform to European Directives
and the supplementary national requirements. Its conformity is
demonstrated by the CE designation.
You can view the Declaration of Conformity on the internet
( back cover).
2.2

Open Source Software

This product contains proprietary software by Bosch (licensed
according to the Bosch standard licensing conditions) and Open Source
Software (licensed according to the Open Source licensing conditions).
The special provisions stated in the license texts apply for LGPL, reverse
engineering is permitted for these components in particular.
You can find Open Source information on the DVD supplied with the
device.
2.3

Product data for energy consumption

The product data on energy consumption can be found in the operating
instructions for the user.
2.4

Tools, materials and miscellaneous parts

You will require the following to carry out installation, assembly and
maintenance:
• Electrical engineering tools and measuring devices
The following may also prove useful:
• A PC for commissioning and service
2.5

Scope of delivery

Upon delivery:
▶ Check that the packaging is in perfect condition.
▶ Check the scope of delivery for completeness.
The scope of delivery includes:
• Digital control unit CC 8313
• User interface (HMI)
• FA outside temperature sensor
• FZ auxiliary temperature sensor for flow or return temperature
• SAFe connecting lead extensions
• SAFe BUS cable extension
• Fixing materials
• Technical documents
Control 8313 – 6720859567 (2017/03)
2.6

Accessories

• Sensor for DHW heating functions
• Function modules
2.7

Product Description

The modular control system provides the perfect means of adjustment
for boilers and wall mounted boilers equipped with a SAFe burner
control unit to ensure the operating conditions for the specific product
are satisfied.
The control unit controls an EMS oil boiler or EMS gas boiler. As an
option, a modulating boiler circulation pump can be activated via a PWM
signal or a 0...10-V interface.
The standard equipment of the control unit comprises the boiler circuit
or heating circuit with mixer and DHW heating functions. So it can be
perfectly matched with the heating system, the control unit can be
extended by up to four function modules.
No parameter settings are lost in the event of a power failure. When the
power supply is restored, the user interface resumes operation.
Notice regarding systems with several heat sources
The CC 8313 control unit can control systems containing several heat
sources (cascades) in combination with the FM-CM cascade module.
For a description of this function, refer to the technical documentation
for the module.
2.8

Determined use

The control unit controls and monitors heating systems in apartment
buildings, residential complexes and other buildings.
▶ Observe country-specific standards and regulations concerning
installation and operation!
Product Information
5