Table of Contents
Advertisement
16/48
Press module Type IH04E | General information on damage to property and damage to product
Bosch Rexroth AG, Edition 09.2022, RE 63129-MON
3 General information on damage to
property and damage to product
The following information applies to chapters 6 to 9:
Impermissible mechanical load due to impact or shock forces on assembled
valves!
Damage to property!
▶ Do not place/put the press module type IH04E on the attachment parts
(e.g. valves).
▶ Never use the assembled valves as a handle or step.
▶ Do not place/put any objects on top of the press module type IH04E.
Contamination of the hydraulic fluid by fluids and foreign particles!
Early wear and malfunctions! Damage to property!
▶ It is imperative that the working environment at the site of installation is
free of dust and foreign substances in order to prevent foreign particles
(e.g. welding beads or metal chips) from getting into the hydraulic lines and
causing wear or malfunctions at the press module type IH04E.
▶ Make sure that all connections, hydraulic lines and attachment parts
(e.g. valves) are clean and free of chips.
▶ For removing lubricants or any other contamination, use industrial residue-free
wipes.
▶ No contamination must enter when closing the connections.
▶ Before commissioning, ensure that all hydraulic connections are tight and
that all seals and caps of the plug-in connections are correctly installed and
undamaged in order to prevent fluids and foreign particles from penetrating
the press module type IH04E.
Mixing hydraulic fluids!
Damage to property!
▶ Generally avoid any mixing of hydraulic fluids of different manufacturers
and/or of different types of the same manufacturer.
▶ Check the compatibility of the various hydraulic fluids and their compatibility
with the components and seals. Mixing of hydraulic fluids may occur for
example due to hydraulic fluid residues in a component.
NOTICE
Advertisement
Table of Contents
