Table of Contents
Advertisement
2
Product Information
2.1
Product description
The room thermostat is compatible for use with Bosch heating
systems in conjunction with the intelligent heating controller
Bosch EasyControl CT200 as well as the intelligent individual
room control SRC 100 RF with radio module K 30 RF.
The product is not compatible with Bosch Smart Home.
The current room temperature and room humidity can be read
on the room thermostat and the desired room temperature can
be set. If the room thermostat is connected to the Bosch app
EasyControl (Bosch EasyControl CT200) or the app Bosch
HomeCom Easy (SRC 100 RF) intelligent individual room
control is available via this. The room temperatures can be read
out and set via the apps and changed with a time program.
The Bosch room thermostat for the underfloor heating system
(hereinafter referred to as "room thermostat") is connected via
cable directly to 230 V- or 24 V actuators at the manifold of the
underfloor heating system.
Existing wired room thermostats can be replaced without
having to route new cables. A standardised flush-wall box is
required for installation. In addition to the frame supplied,
frames of existing switch series can also be retained in many
cases. You can find further information and notes on the
website of Bosch at
www.bosch-homecomfortgroup.com
(select country and then search with keyword Bosch
EasyControl CT200 or SRC 100 RF).
2.2
Intended use
•
The room thermostat is intended exclusively for fixed
installation in flush-mounted electrical boxes with a
minimum depth of 50 mm indoors.
•
The room thermostat may only be operated with the control
element plugged in.
•
The room thermostat is suitable only for controlling
actuators at a maximum current of 1 A (corresponds to
230 W breaking capacity for the 230 V product variant or
24 W at 24 V).
•
The room thermostat is not compatible with Bosch Smart
Home.
Any use other than that described in these instructions is not in
accordance with the intended use and leads to the exclusion of
warranty and liability.
THIW/THIW24 – 6721869244 (2023/06)
▶ To ensure commissioning: follow the safety instructions
and instructions in these instructions as well as in the app.
▶ Observe the information in the technical data
( chapter 2.5).
▶ Avoid dust, moisture and solar exposure.
The control was designed for water-carrying underfloor heating
systems. Operation with other types (e.g. electric) has not
been tested.
2.3
Scope of delivery
1
2
7
Raumthermostat
SGTIN:
Key:
Fig. 17
[1] Flush-mounted unit (thermostat function)
[2] Frame
[3] Control unit
[4] Technical documentation
[5] Screws 3.2 × 15 mm
[6] Screws 3.2 × 25 mm
[7] QR code insert
Product Information
3
4
6
5
0010050793-002
43
Advertisement
Chapters
Table of Contents
