Bosch Control 8313 Service Instructions For Contractors page 52

Appendix
Symbol Name
Measured
temperature
Measured
flow temperature
Heating circuit data
Heating curve
Boiler characteristics
Module selection
Monitor data
Pause
Function test
Automatic mode
Retro mode
(old/new display version)
Frost protection
Operation
Burner starts
Max. boiler temperature
52
Explanation
Display of measured
temperature
Display of measured flow
temperature
Display data of the system
components and functions
incorporated into the system
Selection or display of the
heating curve.
Selection or display of
general boiler data.
Selection or display of modules
Shows set values and actual
values of the system
Interrupts the heating mode.
The heating circuit operates for
the specified period in setback
mode.
Check of connected system
components
Operation of system according
to the set parameters
Changeover of display view to
the display of the CSM/CFB
control (only possible for
functions that were available in
the CSM/CFB control)
Function that prevents freezing
of the system
Display the status of a function
or a system component
Display number of burner
starts
Display of temperature set as
the maximum value
Symbol Name
Reset
Back
Fault
System information
DHW cylinder
Set room temperature
Holiday
Party
Manual operation via mode
Heating Limit (Summer from /
Outdoor Setback)
Setback mode
Information menu
Off
Advanced functions
Actuator
Explanation
Restoring changed values to
the default setting
Return to previous level
Display the status of a function
or a system component
Display of system information.
Selection or display of cylinder
data
Shows the set room
temperature
Interrupts the heating mode.
The heating circuit operates for
the specified period in setback
mode.
Interruption of setback mode.
The heating circuit operates for
the specified period in heating
mode.
Operation of function
(e.g. heating circuit DHW)
via manual settings.
Selection or display of outside
temperature at which the
heating circuit or function is
switched off
Reduction of set temperature
by an adjustable value
(e.g. if 20 °C is set as the
required room temperature,
with a reduction of 4 °C (K) the
room is only heated up to 16 °C)
Display of current parameters
System, system component or
function is switched off.
Additional setting options for
the heating circuit, DHW, etc.
Status display of mixing valve
Control 8313 – 6720859567 (2017/03)