Methods To Create A Function Block; New Fb; Addfb; Function Block Editing - Mitsubishi Electric a2 Series Programming Manual

α
2 Simple Application Controllers
4.4

Methods to Create a Function Block

The two methods of creating a Function Block. The New FB option in the Edit Menu and
AddFB option when connecting two blocks.
4.4.1

New FB

To use the New FB option, proceed to the Edit Menu (Chapter 3) using the "ESC" key. Scroll to
the New FB option and press the "OK" key. Scroll to the desired Function Block and press the
"OK" key to create a New FB. The block will appear on the Function Block Diagram board.
4.4.2

AddFB

When connecting a Function Block, scroll to the AddFB prompt and press the "OK" key. This
invokes the Function Block list. Scroll to the desired Function Block and choose by pressing
the "OK" key. The Function Block will be shown on the screen with the connecting block.
4.5

Function Block Editing

To enter the Function Block editing menu (Chapter 3), press the "OK" key when the Function
Block number and name are flashing on the screen. Up to three options appear on-screen:
Setup FB, Change No, and Delete FB. The Setup Function option is not valid for some
Function blocks and so will not always appear and certain function blocks will also contain a
Time unit option (refer to chapter 6 for function block specification).
4.5.1

Setup Function Block

Each Function Block has its own individual parameters outlined in Chapter 6. The Function
Blocks might have multiple data screens that can be altered. As with other menu options, the
"ESC" key will move the screen back to a higher menu option without changing the option
parameters for that screen. If there are multiple data screens in an option, enter the required
data and accept each screen using the "OK" key. Use the "ESC" key to exit the Function Block.
4.5.2

Change No. (of a Function Block)

Change the number of an existing Function Block with this screen. The current FB number is
shown on-screen when the option is selected. Scroll up or down with the "+" or "-" keys to find
an open FB number. Press the "OK" key to accept the new number.
4.5.3

Delete FB

This menu option will Delete the current Function Block. After the Delete FB is chosen, confirm
the delete operation with "OK" or use the "ESC" key to cancel the function. All connections to
the Function Block will be removed with the block.
Direct Programming 4
F B S e l e c t
A D N
OR
B o o l e a n
S e t / R e s e t
R e t e n t S R
D e l a y e d A L
4 - 3