Mitsubishi Electric a2 Series Programming Manual page 106

α
2 Simple Application Controllers
Setup of the Pulse Width Modulation Function Block directly from the
1 ) Allocate the input pin to be used for the function block.
2 ) Press the "OK" key with the cursor in the function block. The function block edit screen is
displayed as shown.
3 ) Press the "OK" Key and enter the function block settings using the "Up and Down" keys.
4 ) Press the "OK" key with Period highlighted and the user can enter a T and t value using the
" , , + and -" keys.
5 ) Press the "OK" key to return to the function block settings screen. Highlight the Duty option
using the " 0 and
value, Analog In or FB value can be entered.
Press the "ESC" key until the user returns to the function block diagram.
" keys. The Duty can be entered by pressing the "OK" key. A Directset
Function Blocks 6
α
2 Series Controller
B 0 0 1 : P W M
S e t u p F B
C h a n g e N o
D e l e t e F B
B 0 0 1 : P W M
P e r i o d
D u t y
B 0 0 1 : P W M
P e r i o d
T = 1 . 0 s
t = 0 . 0 s
B 0 0 1 : P W M
D i r e c t S e t
A n a l o g I n
F B V a l u e
6 - 52