Exit The Function Block Diagram Board - Mitsubishi Electric a2 Series Programming Manual

α
2 Simple Application Controllers
Use the "+" button to enter a value of 20.0 seconds in the T timer. Move down to the t timer
and enter the value of 5.0 seconds. The "OK" button will accept the data for the entire screen.
If the "OK" button is pressed before all the data on the screen is input, re-enter the screen and
input the data. Data can be changed or edited in the same manner.
Press the "OK" button to accept the values above. Move down to the Priority option and press
the "OK" button. The Priority can be set for either Time or Input.
Move to the Time option and press the "OK" button. All the screen data has now been set.
Return to the FBD using the "ESC" button. See Chapter 6 for details on the One Shot FB.
7.5

Exit the Function Block Diagram board

The programming is complete. To exit the FBD, press the "ESC" key to bring up the Edit Menu.
Scroll to the Exit option and press "OK" to move to the Stop Mode TopMenu.
Let's Make a Program 7
B 0 0 1 : O S
O e n S h o t
T = 2 0 . 0 s
t = 0 . 0 s
B 0 0 1 : O S
P r i o r i t y
T i m e
I n p u t
7 - 6