Password; Serial Com - Mitsubishi Electric a2 Series Programming Manual

α
2 Simple Application Controllers
3.6.7

Password

The password consists of four digits and will prohibit entry into the ProgEdit, Monitor, Disp
Pass and Serial Com modes only. All other menu options can be accessed when a Password
is used.
To Enter a Password:
1 ) Select "Others..." Menu Option.
2 ) Select "Password" from the "Others..." Menu Options
3 ) Use the "+" and "-" keys to enter the desired password.
4 ) Press the "OK" key to accept and activate the password.
5 ) A key symbol will now be displayed at the top of the
To Cancel a Password:
1 ) Select the "Others..." Menu Option.
2 ) Select "Password" from the "Other" Menu Options. "Cancel Password" should appear on
the top of the screen.
3 ) Use the "+" and "-" keys to enter the current password.
4 ) Press the "OK" key to accept and deactivate the password.
5 ) The key symbol will be removed from the
Note 1: A Password protected program in an AL2-EEPROM-2 Cassette can be run from and
be downloaded into the main body of the controller.
Note 2: A controller containing a Password protected program can accept or transfer
programs to an AL2-EEPROM-2.
Note 3: The Password can also be set/deleted from the AL-PCS/WIN-E software or deleted by
the "PROGCLEAR" command.
3.6.8

Serial Com

The modem function capability of the
upload/download. The communication must take place using Visual Logic Software (VLS) and
the communication must be initiated accordingly. (The modem connected to the
initialized upon the
available).
Command - Enter the AT command for the modem to be connected to the controller.
Reference the Modem User manual for details on that unit's AT command. Choose the first
letter or symbol by using the ( ) and ( ) arrows. When the symbol is showing in the command
line, use the
and accept the whole string with the "OK" key when finished inputting the data. (There is no
need to accept each letter with the "OK" key).
Delay - The Delay function sets the length of time the
before turning on the modem. Choose a value of 0 - 10 seconds using the "+" or "-" keys. The
modem connected to the Personal Computer with VLS software must be set ON prior to the
α
2 modem turning on.
The GSM function allows a SMS (Short Message Service) message to be sent to either a
mobile telephone or an email account. The SMS provides the remote user with the identical
LCD screen's data. Refer to the
concerning GSM parameters.
The OtherCom function provides the user with an on-line programming feature using
dedicated protocol. Refer to the
concerning Dedicated Protocol parameters.
α
2 start-up. Dialing options from a command or specific conditions are not
) and ) arrows to move to adjoining spaces. Enter up to 64 letters/symbols
( (
α
α
2 display.
α
2 allows remote monitoring via a PC and program
α
2 will wait after entering the Run mode
α
2 Communication Manual for detailed explanation
α
2 Communication Manual for detailed explanation
2 display.
3 - 20
System Menu 3
α
2 is