Mitsubishi Electric a2 Series Programming Manual page 149

α
2 Simple Application Controllers
Setup of the Retentive Set/Reset Function Block directly from the
1 ) Allocate the input pin to be used for the function block.
2 ) Press the "OK" key with the cursor in the function block. The function block edit screen is
displayed as shown.
3 ) The function block operates on a Set or Reset priority. Select the priority using the "
" keys and subsequently press the "OK" key.
4 ) Press the "OK" key and use the "ESC" key to return to the FBd.
Function Blocks 6
α
2 Series Controller
B 0 0 1 : RS R
S e t u p F B
C h a n g e N o
D e l e t e F B
B 0 0 1 : RS R
P r i o r i t y
S e t
R e s e t
6 - 95
and