Mitsubishi Electric a2 Series Programming Manual page 69

α
2 Simple Application Controllers
2 ) ON delay timer
Input pin I
ON
Input pin C
Output
On delay
Time
3 ) OFF delay timer
Input pin I
Input pin C
Output
Setup of the Delay Function Block directly from the
1 ) Allocate the input pin to be used for the function block.
2 ) Press the "OK" key with the cursor in the function block. The function block edit screen is
displayed as shown.
3 ) Press the "OK" key to set the Time unit for the delayed output.
4 ) Press the "OK" key having selected the value for the delayed time unit and return to the
function block edit screen. Using the "
"OK" key. The screen displayed is shown.
5 ) Select the On or Off Delay using the "
time can be entered using the "+" or "-" keys.
6 ) Press the "OK" key to accept the time figures and subsequently press the "ESC" key to
return to the function block edit screen.
ON
ON OFF
Shorter than
On delay time
Off delay time
On delay
Time
Shorter than Off delay time
α
2 Series Controller
and " keys highlight the Setup FB and press the
and " Keys and press the "OK" key. The Delay
Function Blocks 6
On delay
Time
B 0 0 1 : D L
T i me u n i t
S e t u p F B
C h a n g e N o
D e l e t e F B
T i me u n i t
1 0 m s
1 0 m s 0
1 s
B 0 0 1 : D L
O n D e l a y
O f f D e l a y
B 0 0 1 : D L
O n D e l a y
T = 0 . 1 s
t = 0 . 0 s
6 - 15