Mitsubishi Electric a2 Series Programming Manual page 99

α
2 Simple Application Controllers
Setup of the Hour Meter Function Block directly from the
1 ) Allocate the input pin to be used for the function block.
2 ) Press the "OK" key with the cursor in the function block. The function block edit screen is
displayed as shown.
3 ) Press the "OK" key to set the Time unit for the delayed output.
4 ) Press the "OK" key having selected the correct time unit and return to the function block
edit screen. Using the "
5 ) Press the "OK" key with Hour highlighted and using the " ,
hour time for the specified block.
6 ) Press the "OK" key with Minute highlighted and using the " ,
total minute time for the specified block.
and " keys highlight the Setup FB and press the "OK" key.
Function Blocks 6
α
2 Series Controller
B 0 0 1 : HM
T i me
S e t u p F B
C h a n g e N o
D e l e t e F B
T i me u n i
h h : mm
mm : s s
B 0 0 1 : HM
H o u r
M i n u t e
, + and -" Keys enter the total
B 0 0 1 : HM
H o u r
T =
t =
, + and -" Keys enter the
B 0 0 1 : HM
M i n u
T =
t =
u n i t
t
1 h
0 h
t e
0 m
0 m
6 - 45