Mitsubishi Electric a2 Series Programming Manual page 94

α
2 Simple Application Controllers
Setup of the Zone Compare Function Block directly from the
1 ) Allocate the input pin to be used for the function block.
2 ) Press the "OK" key with the cursor in the function block. The function block edit screen is
displayed as shown.
3 ) Press the "OK" Key and enter the function block settings using the "
4 ) Pressing the "OK" invokes the input data type menu..
5 ) Press the "OK" Key and a DirectSet value can be entered.
6 ) Press the "OK" Key and an Analog Input in can be entered.
7 ) Press the "OK" key and data from another function block can be entered.
8 ) Having set the L and H condition using the same procedure and specified the Set or Reset
while in zone compare area use the "ESC" key to return to the function block edit screen.
Function Blocks 6
α
2 Series Controller
B 0 0 1 : Z C
S e t u p F B
C h a n g e N o
D e l e t e F B
and " keys.
B 0 0 1 : Z C
Cmp V a l
L < = I < = H : S
B 0 0 1 : Z C
D i r e c t S
A n a l o g
F B V a l u e
B 0 0 1 : Z C
Cmp V a l
D i r e c t S e t
B 0 0 1 : Z C
Cmp V a l
A n a l o g
A 0 1
B 0 0 1 : Z C
Cmp V a l
N o t E x i s t
V a l i d F B
6 - 40
L
0
e t
I n
L
0
L
I n
0
L