Mitsubishi Electric a2 Series Programming Manual page 104

α
2 Simple Application Controllers
Setup of the Speed Detect Function Block directly from the
1 ) Allocate the input pin to be used for the function block.
2 ) Press the "OK" key with the cursor in the function block.
The function block edit screen is displayed as shown.
3 ) Press the "OK" Key and enter the function block settings using the "
4 ) Press the "OK" key with Period highlighted and the user can enter a T and t value using the
" , , + and -" keys.
5 ) Press the "OK" key to return to the function block settings screen. Highlight the Speed(L,H)
option using the "
the "OK" key. A Directset value, Analog In or FB value can be entered.
6 ) Press the "ESC" key until the user returns to the function block diagram.
and " keys. The limits can be set by highlighting L or H and pressing
Function Blocks 6
α
2 Series Controller
B 0 0 1 : S P
S e t u p F B
C h a n g e N o
D e l e t e F B
and
B 0 0 1 : S P
P e r i o d
S p e e d ( L ,
B 0 0 1 : S P
P e r i
T =
t =
B 0 0 1 : S P D
D i r e c t S e t
A n a l o g
F B V a l u e
6 - 50
D
" keys.
D
H )
D
o d
1 . 0 0 s
0 . 0 0 s
I n