EWM Tetrix 351 AC/DC Synergic FW Operating Instructions Manual page 14

For your safety
Transport and installation
The units are designed for operation in an upright position!
Operation in non-permissible positions can cause equipment damage.
•
Only transport and operate in an upright position!
Accessory components and the power source itself can be damaged by incorrect connection!
•
Only insert and lock accessory components into the relevant connection socket when the ma-
chine is switched off.
•
Comprehensive descriptions can be found in the operating instructions for the relevant ac-
cessory components.
•
Accessory components are detected automatically after the power source is switched on.
Protective dust caps protect the connection sockets and therefore the machine against dirt and
damage.
•
The protective dust cap must be fitted if there is no accessory component being operated on
that connection.
•
The cap must be replaced if faulty or if lost!
14
099-000109-EW501
23.08.2018