Safety Precautions - Labconco Protector XStream 11041 Series User Manual

Original instructions
See Diagram on Page 22.
22.
AVERTIR – Classification des prises de courant est spécifié dans l'Annexe D.
23.
AVERTIR – Voir Annexe C et D pour la classification complete du courant.
24.
AVERTIR – Gaz Inflammable.

Safety Precautions

!

Product Service 1-800-522-7658
Chapter 4: Performance Features & Safety Precautions
CAUTION – Current rating of receptacle is specified in Appendix D.
CAUTION – See Appendix C and D for complete current rating.
CAUTION – Flammable Gas.
Although the laboratory hood has been engineered to maintain
optimum operator safety, caution should always be used while
working in the hood. Prior to using the hood, check to make
sure that the exhaust blower is operating and that air is
entering the hood at its specified face velocity.
Bien que la hotte de laboratoire ait été réglée pour maintenir la
sécurité optimale de l'opérateur, la prudence devrait toujours
être utilisée en travaillant sous la hotte. Avant utiliser la hotte,
le contrôle pour s'assurer que la soufflerie d'aspiration
fonctionne et que cet air entre dans la hotte au flux spécifié.
USE GOOD HOUSEKEEPING IN THE HOOD AT ALL TIMES.
CLEAN UP SPILLS IMMEDIATELY WITH A MILD
DETERGENT. PERIODICALLY CLEAN HOOD INTERIOR,
INCLUDING LED LIGHT GLASS PANEL. REPLACE
BURNED OUT LIGHT BULBS TO MAINTAIN MAXIMUM
ILLUMINATION.
DO NOT OVERLOAD THE WORK SURFACE WITH
APPARATUS OR WORK MATERIAL. THE SAFE
OPERATION OF THE LABORATORY HOOD IS BASED
UPON HAVING PROPER AIRFLOW THROUGH THE
STRUCTURE. DO NOT PLACE LARGE, BULKY OBJECTS
SUCH AS BLOCK HEATERS, DIRECTLY ON THE HOOD
WORK SURFACE. INSTEAD, ELEVATE THE OBJECT 2" TO
3" ON BLOCKS TO ALLOW A FLOW OF AIR UNDER THE
OBJECT AND INTO THE LOWER REAR BAFFLE EXHAUST
SLOT. ENSURE BLOCKS ARE LEVEL AND SECURED IN
PLACE.
23