Chapter 7: Modifying Your Protector Xstream; Installing Work Surfaces - Labconco Protector XStream 11041 Series User Manual

Original instructions
C 7
HAPTER
M Y
ODIFYING OUR
P XS
ROTECTOR TREAM
There are several ways to modify the fume hood for your individual requirements.
These include the addition of work surfaces, service fixtures, air monitor,
distillation grids, electrical duplex outlets, ceiling enclosures, and rear panels.

Installing Work Surfaces

Your Protector XStream Fume Hood with Eco-Foil requires a large 1.0" leading
edge radiused work surface to work properly, and achieve high performance. The
work surface used for the Flush Foil also has precise dimensions for optimal
performance. Contact Labconco Customer Service for ordering information.
Figure 7-1
Product Service 1-800-522-7658
33