To Install The Software Using The Installation Script - Sun Microsystems GigaSwift Ethernet Adapter Installation And User Manual

To Install the Software Using the Installation
Script
1. At the system console, become superuser (root).
2. Insert the Sun GigaSwift Ethernet Adapter CD into a CD-ROM drive that is
connected to your system.
If your system is running Sun Enterprise Volume Manager, it should
automatically mount the CD-ROM to the /cdrom/cdrom0 directory.
If your system is not running Sun Enterprise Volume Manager, mount the CD-
ROM as follows:
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0
Note – If you are installing the software from the download site, follow the online
download instructions.
3. Change to the directory were the installation script resides:
# cd /media_path/
Where:
media_path = /cdrom/cdrom0, if you are installing from the CD-ROM.
Or
unzipped GigaSwift_path/Sun_GigaSwift_Ethernet_Driver, if you
downloaded the driver from the Sun download center.
Chapter 2 Installing the Adapter 15