Sun Microsystems GigaSwift Ethernet Adapter Installation And User Manual page 39

Script Output for SPARC Systems When Requirements Are Met
CODE EXAMPLE 2-1
*** Checking for correct version of GigaSwift Ethernet Driver
Packages...
*** Checking for correct version of GigaSwift Ethernet Driver
Patches...
*** Checking for correct version of VLAN Utility Driver Packages..
*** Checking for correct version of VLAN Utility Driver Patches...
The CE/VLAN driver(s) installed on this system for:
Dual GigaSwift Ethernet Adapter Driver
meets or exceeds the required package or patch version. No changes
to the system are required - exiting.
Example 2: All Requirements Met on Solaris 9 x86 Systems
Following is an example of an installation script output if the driver and patch
requirements are met on Solaris 9 x86 systems:
Script Output for x86 Systems When Requirements Are Met
CODE EXAMPLE 2-2
Product Installation
1 - Dual Gigabit Ethernet Dual SCSI/P Adapter
2 - GigaSwift Ethernet Adapter (copper/fiber)
3 - GigaSwift Ethernet Compact PCI Adapter
4 - Quad GigaSwift Ethernet Adapter
Please select the product to install: 2
GigaSwift Ethernet Adapter Driver for x86 Installation.
Copyright 2004 Sun Microsystems, Inc.
Use is subject to license terms.
*** Checking for correct version of GigaSwift Ethernet Driver
Packages...
*** Checking for correct version of GigaSwift Ethernet Driver
Patches...
*** Checking for correct version of VLAN Utility Driver Packages..
*** Checking for correct version of VLAN Utility Driver Patches...
The CE/VLAN driver(s) installed on this system for:
All rights reserved.
Chapter 2 Installing the Adapter 17