Verifying The Software Installation; Configuring Driver Parameters; Configuring Vlans - Sun Microsystems GigaSwift Ethernet Adapter Installation And User Manual

Verifying the Software Installation

After you have run the automated installation script, check to be sure you have the
current version of the driver installed.
Use the modinfo command to verify that you have the current driver (v1.137 or
later) installed.
Type grep CE, using uppercase letters, to get only the specific driver information:
# modinfo |grep CE
84 7821c000 4f9a6 75 1 ce (CE Ethernet Driver v1.137)

Configuring Driver Parameters

See Chapter 4, "Configuring Driver Parameters," for complete instructions.
Configuring driver parameters is the same on both SPARC and Solaris 9 x86
systems.

Configuring VLANs

See Chapter 5, "Configuring VLANs," for complete instructions. Configuring
VLANs is the same on both SPARC and Solaris 9 x86 systems.
Appendix B Using the Sun GigaSwift Ethernet Driver in Solaris 9 x86 Operating Systems 87