2
C H A P T E R
Installing SunSAI/P Boards
Before You Install the Board
Write down the serial number of the board. You will need it if you have to contact
Sun regarding the board.
There are no switches or jumpers on the SunSAI/P board.
SunSAI/P boards contain static-sensitive components. Always touch a grounded
surface to discharge static electricity before handling the circuit board.
Installing the Board
Now you are ready to install the SunSAI/P board in your computer. Follow these
steps:
Note – Refer to your system installation or service manual for detailed instructions
for the following steps.
1. Power off your system, using the standard shut down procedures described in the
Solaris Handbook for Sun Peripherals or your system service manual.
The Solaris Handbook for Sun Peripherals is shipped with the Solaris operating
environment software and is available on the http://docs.sun.com website.
2. Locate an available PCI slot in your computer and remove the slot plate.
3. Install the SunSAI/P board according to the instructions in the platform service or
installation manual.
3