Led Displays On The Mmf Adapter; Sun Gigaswift Ethernet Utp Adapter; Figure 1-1 Sun Gigaswift Ethernet Mmf Adapter; Table 1-1 Front Panel Display Leds For The Mmf Adapter - Sun Microsystems GigaSwift Ethernet Adapter Installation And User Manual

FIGURE 1-1

LED Displays on the MMF Adapter

Four LEDs are displayed on the front panel of Sun GigaSwift Ethernet MMF adapter.
They are labeled on the front panel as shown in
TABLE 1-1
Label
LINK
FDX
TX
RX
*LED will not light until the latest version of the driver software is installed.

Sun GigaSwift Ethernet UTP Adapter

The Sun GigaSwift Ethernet UTP adapter is a low-profile, single-port gigabit
Ethernet copper-based PCI bus card. It can be configured to operate in 10, 100, or
1000 Mbit/sec Ethernet networks. At 10 or 100 Mbit/sec the adapter can be set to
either half or full-duplex. At 1000 Mbit/sec, the adapter must operate at full-duplex.
2 Sun GigaSwift Ethernet Adapter Installation and User's Guide • August 2004
Sun GigaSwift Ethernet MMF Adapter
Front Panel Display LEDs for the MMF Adapter
Meaning if Lit
Link is up.
Link is in full-duplex mode.
Link is transmitting.
Link is receiving.
.
TABLE 1-1
Color Source
Green* MAC
Green MAC
Green MAC
Green MAC