Configuring The Network Host Files - Sun Microsystems GigaSwift Ethernet Adapter Installation And User Manual

Use the modinfo command to verify that you have the current driver (v1.136 or
later) installed.
If you type grep CE, using uppercase letters, you will get only the specific driver
information:
# modinfo |grep CE
84 7821c000
If you type grep ce, using lowercase letters, you will still get the driver version
information, but you will also get several lines of additional information. Your
output will be similar to the following. The line showing the driver version is in bold
italics.
# modinfo |grep ce
11 1018bacb
12 1018bc1b
13 10199c5b
35 1026ba5c
36 1026d290
47 102663c6
48 10296ed4
50 1026650a
51 10278264
52 10234ef7
53 10280174
54 102666af
56 10260029
71 102f6d1d
84 7821c000
115 10232ced

Configuring the Network Host Files

After installing the driver software, you must create a hostname.cenumber file
(Where
number = the instance number of the ce interface.) for the adapter's Ethernet
interface. You must also create both an IP address and a host name for its Ethernet
interface in the /etc/hosts file.
22 Sun GigaSwift Ethernet Adapter Installation and User's Guide • August 2004
4f9a6 75 1 ce (CE Ethernet Driver v1.136)
1f7 - 1 fssnap_if (File System Snapshot Interface)
10900 1 1 rpcmod (rpc interface str mod)
66f10 3 1 ip (IP Streams device)
1ae7 - 1 busra (Bus Resource Allocator (BUSRA) )
c4c - 1 hpcsvc (hot-plug controller services v1)
304 143 1 ip6 (IP Streams device)
25e08 42 1 tcp (TCP Streams device)
365 146 1 tcp6 (TCP Streams device)
9968 41 1 udp (UDP Streams device)
365 145 1 udp6 (UDP Streams device)
7f10 5 1 icmp (ICMP Streams device)
30e 144 1 icmp6 (ICMP Streams device)
4bfb 10 1 timod (transport interface str mod)
1c30 43 1 rts (Routing Socket Streams device)
4f9a6 75 1 ce (CE Ethernet Driver v1.136)
dc6 24 1 pts (Slave Stream Pseudo Terminal dr)